Operating Instruction of e-plus Ion-Spa Device

E-Plus Ion Cleanse Foot Spa - Re-charge & Re-active your body!

The life span and health of a human are determined by the amount of electron that they carry in the body. A healthy person is supposed to contain 80% of negative electron and 20% of positive electron in the body, which is more commonly known as Yin Yang (+ive & -ive) balancing. Because of poor diet and high stress, we tend to accumulate and store excessive quantities of waste products such as diacetic, lactic, pyruvic, uric, carbonic, acetic, butyric and heptic acids. The E-Plus Ion Spa with built in micro computer system will generate negative potential field in the water and through process of osmosis; it will strengthen the cells activation in the body.

How it works ?

The E-Plus Ion Spa machine generates negative potential field in the water and these negative field travel to the body to re-activate and re-charge the positively (unbalanced) charged human cell. A water molecule is composed of two hydrogen atoms and one oxygen atom. When the molecule loses a hydrogen atom, the remaining OH molecule takes on a negative charge. This process is essential for a healthy body. During the ionizing process, your body absorbs millions of the negatively charged ions, which alkalize the blood and tissue. Your feet are in direct contact with the ions being manufactured in the water.

1. Always fill in health status form before the treatment. (provided by the company)
2. Insert the plug of electrodes to the front panel of the display board.
3. Plug in the cable of transformer to the back panel of display board, whereas the other end of the cable will be plug in to the power supply.
4. Put the electrodes 5-6 cm deep under the water. Please ensure that the central part of the copper plate is covered by water.Note: The water level must not exceed over the top of electrodes, or all parts would be corroded and greatly influence the function of the device.
5. Muscle testing is not necessary for ordinary treatment; connect the electricity by switching on the button.
6. Plug the cable of the array into the unit, turn right to lock and left to unlock.
7. Press button ‘OK’ and start to choose the treatment options that are shown on the screen, press [+] or [-] to adjust an appropriate options for treatment.
8. There are 5 different treatment options. (Option 3 is commonly used by normal user)
9. After choosing the option, soak feet in the water, then press button ‘OK’ and set the time duration for treatment. The time setting can be adjusted by pressing [+] or [-].
10. Press OK to confirm, and press START to run the cleansing process
11. Panel display (A) ampere 0.10 - 1.00, add a bit of salt into the water until (A) ampere become 1.7-2.1The quality of water varies in different places. (A) ampere is capable of measuring the residue and conductivity of the water, if the water is over (A) ampere 1.00, please replace with water processed by carbonization/fibre filters.
12. There is always some information displayed after each foot bath.
13. The electrode plate must be disinfected by washing with hot water, bleach or cleaner after each treatment.
    

Welcome to visit us at www.aysia.com.my